How to Use Crown Liquid Deglosser
Crown Liquid Deglosser is a powerful tool for enhancing the appearance and longevity of your wooden furniture and cabinets. Whether you’re refinishing an old piece or giving new furniture a professional finish, understanding how to use this product correctly is essential. In this article, we’ll guide you through the process of using Crown Liquid Deglosser to achieve the best results.
Step 1: Preparation
Before you begin, make sure you have all the necessary materials and tools. You’ll need:
– Crown Liquid Deglosser
– Paintbrush or roller
– Drop cloths or plastic sheeting
– Lint-free rags or paper towels
– Safety goggles and gloves
– Sandpaper (if needed)
Step 2: Surface Preparation
1. Clean the surface: Start by cleaning the wooden surface with a damp cloth to remove any dust, dirt, or grease.
2. Sand the surface: If the wood has a glossy finish, lightly sand the surface with 220-grit sandpaper to create a rougher texture for the deglosser to adhere to.
3. Dust off the surface: Use a damp cloth to wipe away any sanding dust. Allow the surface to dry completely before applying the deglosser.
Step 3: Applying the Deglosser
1. Shake the bottle: Shake the Crown Liquid Deglosser bottle well before use to ensure the product is well-mixed.
2. Apply the deglosser: Using a paintbrush or roller, apply the deglosser evenly over the surface. Work in small sections to ensure complete coverage.
3. Allow it to dry: Follow the manufacturer’s instructions for drying time. Typically, it takes about 10-15 minutes for the deglosser to dry.
Step 4: Cleaning Up
1. Clean your tools: After the deglosser has dried, clean your paintbrush or roller with soap and water. For a more thorough clean, you can use a deglosser solvent.
2. Wipe away any drips: Use a lint-free rag or paper towel to wipe away any drips or excess deglosser from the surface.
3. Dispose of the deglosser: Dispose of the unused deglosser according to local regulations.
Step 5: Final Touches
1. Inspect the surface: Once the deglosser has completely dried, inspect the surface for any missed spots or uneven areas. If necessary, apply a second coat of deglosser.
2. Refinish or paint: After the deglosser has dried, you can proceed with refinishing or painting the surface as desired.
By following these steps, you’ll be able to effectively use Crown Liquid Deglosser to achieve a professional-looking finish on your wooden furniture and cabinets. Remember to always read and follow the manufacturer’s instructions for the best results.
