How to Fill Fresh Water Tank on Camper
Filling the fresh water tank on your camper is an essential task that needs to be done regularly to ensure you have a constant supply of clean water for cooking, cleaning, and drinking. Whether you are a seasoned camper or a beginner, knowing how to fill the fresh water tank properly is crucial for a smooth and enjoyable camping experience. In this article, we will guide you through the steps to fill your camper’s fresh water tank safely and efficiently.
1. Locate the Fresh Water Tank
The first step in filling your fresh water tank is to locate it. Most campers have the fresh water tank positioned on the driver’s side, behind the wheel. However, the location may vary depending on the make and model of your camper. Consult your owner’s manual for the exact location of your fresh water tank.
2. Open the Tank Access Door
Once you have located the fresh water tank, open the access door. This door is usually held in place by a latch or a screw. Make sure to keep it open throughout the filling process to allow air to escape and prevent the tank from bursting.
3. Connect the Water Hose
Next, connect a fresh water hose to the camper’s water inlet. The water inlet is typically located near the access door of the fresh water tank. Ensure that the hose is securely attached to both the camper and the water source, such as a campground water spigot or a well.
4. Turn on the Water Supply
With the hose connected, turn on the water supply at the source. If you are using a campground water spigot, simply turn the handle clockwise to open the valve. If you are using a well, you may need to turn on the pump to get water flowing.
5. Fill the Tank
As the water starts flowing, open the valve on the camper’s water inlet to allow it to fill the tank. Keep an eye on the water level to ensure that it does not overflow. Once the tank is full, turn off the water supply and disconnect the hose.
6. Flush the System
After filling the tank, it is essential to flush the water system to remove any air bubbles and ensure that water flows smoothly. Turn on a faucet or flush the toilet to get water moving through the lines. If you have a water pump, run it for a few minutes to help expel any remaining air.
7. Close the Tank Access Door
Finally, close the access door of the fresh water tank and secure it in place. Double-check that all connections are tight and that the door is properly latched.
By following these simple steps, you can fill your fresh water tank on a camper quickly and easily. Remember to check the water level regularly and maintain your water system to ensure a comfortable and enjoyable camping experience.
