How to Remove Crown of Watch
Watches are essential accessories that not only tell time but also serve as a fashion statement. However, at times, you may need to remove the crown of your watch for various reasons, such as adjusting the time, changing the date, or replacing the battery. Removing the crown of a watch can be a daunting task, especially if you are not familiar with the process. In this article, we will guide you through the steps on how to safely remove the crown of your watch.
Understanding the Watch Crown
Before diving into the process of removing the crown, it is essential to understand its purpose and the different types of crowns. The crown is a small, circular protrusion on the side of the watch case that is used to adjust the time and date. There are typically three positions for the crown:
1. The first position is used to set the time and date.
2. The second position is used to wind the watch manually.
3. The third position is used to lock the crown and prevent accidental adjustments.
Preparation for Removing the Crown
Before you begin, ensure that you have the following:
1. A soft cloth to protect the watch’s surface.
2. A small, flat-head screwdriver (if needed).
3. A clean, dry environment to prevent any damage to the watch’s internal components.
Step-by-Step Guide to Removing the Crown
1. Identify the Crown Position: Ensure that the crown is in the second position (winding position) or the third position (locked position). If it is in the first position (time-setting position), gently pull it out to the second position.
2. Remove the Watch Band: If your watch has a band, gently remove it from the watch case to provide better access to the crown.
3. Check for a Screw: Some watches have a small screw on the back of the case that secures the crown. If present, use a small, flat-head screwdriver to remove the screw.
4. Remove the Back Cover: With the screw removed (if applicable), gently twist the back cover counterclockwise to release it from the watch case.
5. Remove the Crown: Once the back cover is removed, you will see the crown attached to the movement. Gently pull the crown out to the desired position (second or third position) to remove it from the watch case.
6. Replace the Back Cover: If you had to remove the screw to access the crown, reinsert the screw and tighten it securely. Then, replace the back cover and twist it clockwise until it is snug.
7. Reattach the Watch Band: If you removed the watch band earlier, reattach it to the watch case.
8. Test the Watch: Once the crown is securely in place, test the watch to ensure that it is functioning correctly.
By following these steps, you can safely remove the crown of your watch for necessary adjustments or maintenance. Remember to handle your watch with care and consult a professional if you are unsure about any aspect of the process.
